Liquid Nails Exterior
Selleys Liquid Nails Exterior is a high-performance construction adhesive specifically designed for outdoor use. It can withstand heat, water and UV.
Liquid Nails Heavy Duty
Key Features
- 2X more strength than Liquid Nails Original in less than half the time
- *Fast speed of cure means mechanical fasteners can be removed after 8 hours on porous surfaces, compared to 24 hours for Liquid Nails(R) Original
- No drip, slump or stringing, even when applying a bead to overhead surfaces
- Excellent resistance to water and weather makes it suitable for interior and exterior applications
- Strong bond that is flexible enough to respond to building movement
- Easy to extrude from the cartridge at low winter temperatures
Selleys Liquid Nails Original
Selleys Liquid Nails Original is a high strength multipurpose construction adhesive that forms a strong and lasting bond on most building substrates.
Selleys Liquid Nails Clear
Selleys Liquid Nails Clear is a high strength construction adhesive that dries clear, blending into the surface therefore reducing unsightly mess. It is ideal where a fine finish is required.
Selleys Liquid Nails Instant Hold
Selleys Liquid Nails Instant Hold is a high performance construction adhesive that delivers an instant hold up to 400kg per m2 on any building material, even vertical surfaces*.
- Overview
- Instructions
- Specifications
Selleys Liquid Nails Heavy Duty is an advanced high performance construction adhesive which means mechanical fasteners can be removed after 8 hours*. The non-slump formulation also offers extreme strength and durability, even when bonding two non-porous materials. It can be used on most building substrates.
Where can this product be used?
- Sheet flooring to joists
- Metal or aluminium door strips to floors and walls
- Timber or fibre cement sheeting to cement block or brick walls
- Masonite / hardboard to timber or floorboards
- Wallboard or panelling to wood or metal frames
- Cork tiles to timber, fibre cement or plaster
- Timber flooring to yellow tongue in conjunction with mechanical fixings to avoid later squeaking
What materials is this product suitable for?
- Timber
- MDF
- Plasterboard
- Plastics** (Pre-test to determine suitability)
- Masonry
- Concrete
- Particleboard
- Metals
- Rubber
- Glass
- Tiles
- Ceramics
- ** Not for polyethylene, polypropylene or teflon
How to Use
Do not swallow. Use in a well ventilated area. Avoid contact with skin and eyes. Pierce foil seal before inserting into caulking gun.
- Ensure surfaces are dry and free from oil, grease and dust. Wipe off any pooled water from wet timber.
- Cut cartridge tip and pierce foil, attach nozzle and cut to size (5mm), then insert into caulking gun.
- Apply bead along length of joist, stud or batten. On broad flat surfaces apply beads every 40cm.
- Position pieces and press firmly together. fix with sufficient nails, screws or clamping to hold load and achieve contact over total bond area. Repositionable for up to 20 minutes after fitting.
- Allow adhesive to set (minimum 8 hours) before removing any temporary fasteners or clamping. Use with mechanical fasteners in high stress applications.
Contact Bond Method
For immediate bond use contact bond method, apply to one surface only, press together and pull apart. Allow surfaces to dry 2-4 minutes, before firmly joining.
Flooring
When fixing sheet flooring (e.g. particleboard), use in conjunction with flooring manufacturer’s installation specifications for minimum nailing requirements.
Note: To eliminate squeaks in tongue and groove flooring, use Liquid Nails Heavy Duty in conjunction with mechanical fixings.
Limitations:
- Avoid use in tightly clamped joints eg. Cabinet making or joinery
- Not for use on mirrors. Use Liquid Nails® Mirror Metal & Glass
- Not for metals heated by direct sunlight. Bonds weaken at higher temperatures. Use Liquid Nails® Mirror Metal & Glass
- Not for Styrene Foam. Use Liquid Nails® Fast Grab
- Do not use as the sole bonding agent for structural bonding.
- Not for permanent water immersion.
- **Pre-test plastics to determine compatibility. Not for polyethylene, polypropylene or teflon
Handy tips
- *Usually mechanical fasteners are required for only 8 hours on porous surfaces and a strong bond is achieved in 24 hours and continues to strengthen over 2-3 days. Cures in 7 days. Expect longer times for thicker applications, less porous surfaces and in cold weather.
- Adheres to wet/poor seasoned timber.
- Bridges Gaps up to 9mm
- Paintable after 24 hours
Clean Up
- Uncured product may be removed with mineral turps.
- Cured product can be removed by scraping or sanding.
Size |
350g Cartridge |
Colours |
Beige |
Technology |
Solvent Based |
Use |
Interior |
|
Exterior |
Useful downloads
How to Guides
How To Update Skirting Boards
Get your living room looking new again with Selleys. Our guide will show you how to update your skirting boards with easy DIY projects.
How To Install Cornices
Upgrade your living room with cornices from Selleys. Our guide will show you how to install cornices quickly and easily.
How To Build a Floating Desk
Maximize your bedroom space with a floating desk from Selleys. Our DIY guide will show you how to create a functional and stylish workspace.
How To Make a Kids Hanging Rack
Get your kid's room organized with a hanging rack from Selleys. Our easy DIY guide will show you how to make a functional and fun storage solution.
Share
Share this Product with your friends