Rapid Mould Killer (750ml)

1. To open, twist nozzle to SPRAY position (as indicated on the nozzle). For a low fumes option, choose STREAM.
2. Spot test on an inconspicuous area to ensure no discolouration occurs.
3. Spray affected areas, leave for 30 seconds, then rinse, wipe or scrub off.
4. To prevent accidental spraying, close nozzle by twisting to OFF position. Avoid contact with mirror tiles, unglazed tiles, fabric, worn laminates, metallic surfaces or older baths and basins.

WARNING - THIS IS A CORROSIVE PRODUCT. PLEASE READ SAFETY INSTRUCTIONS ON THE BACK OF THE BOTTLE BEFORE OPENING OR USING.

• On some matt finish tiles or in hard water areas, staining may occur. Patch test first on an inconspicuous area. If staining occurs, rinse well and apply hydrogen peroxide to the affected area.
• Test for colour fastness before use. Patch test on an inconspicuous area.
• Not suitable for use on fabric as bleaching will occur (if spilt, rinse immediately), mirror tiles, metallic surfaces, and older baths and basins, and unsound painted surfaces.
• Do not mix Rapid Mould Killer with other household chemicals or cleaners.

• Ensure that floor surfaces are well rinsed after using Rapid Mould Killer as they may be slippery.
• Before using with a cloth, brush or scourer ensure they are not affected by bleach. Avoid using with steel wool or wire brushes.
• Stubborn stains and soap scum may require a longer time or second application.