Kwik Grip High Temp Spray

1. Ensure surface is clean and dry
2. Shake can well before use. Holding can 20cm away, spray both surfaces liberally and evenly.
3. CONTACT BOND METHOD: Keep surfaces apart until adhesive is touch dry, no longer than 5 minutes.
   WET BONDING: Apply product more liberally and immediately press surfaces together, using clamps to hold in place.
4. Position items carefully and when perfectly aligned, press surfaces together and apply an even pressure. Clamp or use a roller over the bonded surfaces.
   Full bond strength reached in 24 hours.

Not suitable for use on Polystyrene foam.

Pre-test in an inconspicuous area to ensure compatibility with materials.

Due to the adhesives fast cure time, it is recommended that for large jobs you work in small sections, applying adhesive in areas up to 1m² at a time.

If one or both substrates are porous;

• You will have less time to work with and in this instance the wet bonding method is recommended.
• Apply Kwik Grip Adhesive generously to both surfaces.
• Clamping is required when using the Wet Bond method, as an instant bond cannot be achieved via this method

Clean nozzle after use - invert can and spray until clear propellant comes out. Nozzles may be soaked in turps to keep clean. Clean wet adhesive with mineral turps.