Fix & Go High Prevision Bottle Supa Glue

1. Ensure surfaces to be bonded are clean, dry, free of dust, and close fitting.
2. Hold bottle in an upright position. Pierce seal by attaching nozzle and cap and turning clockwise.
3. Remove cap and squeeze gently to apply one drop at a time to one surface only. Hold down the dispenser button for a bead of glue. Do not over apply. Bring surfaces together and apply slight pressure (30 seconds). Allow 30 minutes to provide sufficient bond strength for practical use. Maximum bond strength reached after 12 hours.
4. Wipe nozzle clean with cloth or paper. Reseal cap in clockwise direction. Tap bottle lightly on surface to clear nozzle. Store in a cool, dry place.

Limitations:

• *Not suitable for bonding plastics such as Polypropylene and Polyethylene. Use Selleys All Plastic Fix.
• Not for glass. Use Selleys Araldite Ultra Clear.
• Leather may become hardened or discoloured.
• Not suitable for repairing items that are in direct contact with hot liquids.
• Will not permanently bond materials containing alkaline elements.
• Has no gap filling properties therefore surfaces need to be a close fit.
• Not recommended for highly porous surfaces.
• Water resistant not water proof, therefore not suitable for surfaces that will be continually wet.

• To use the glue saver nozzle, before completely dispensing a drop of Supa Glue, release pressure on the dispenser buttons and the glue saver will retract the glue back into the bottle.
• Excellent when used with other adhesives, as a temporary tack
• In the event that fingers get stuck together, apply a solvent such as acetone to contact areas then wash off with water. Do not use solvents near eyes or open wounds.
• Since Supa Glue cures with moisture set times may be extended on very dry surfaces or under dry conditions.
• Supa Glues cure more lowly when large amounts are used. For faster cure use sparingly.

• Uncured product may be removed with acetone.
• Cured product can be sanded and scraped.