Selleys FlameFlex
Selleys FlameFlex High Performance Sealant can be used for construction joints & gaps where a fire rated seal is specified*.
Solarflex
This product has been discontinued. Please see some related products below. Alternatively, to speak to our Help & Advice team, please call 1300 555 205 (select Option 2) or start a live chat during business hours.
Key Features
- Superior weather protection
- Long lasting flexibility
- No primer required before painting
- Water tight seal with a 10 year guarantee*
- Adhesion to wet or damp surfaces
- Non-bubbling
- Better curing and extrudability (>5°C) with no slump
- Paintable with water-based paints after product skins in 60 to 90 minutes
- Low VOC**
Selleys Glass Silicone
Selleys Glass Silicone is an acetic acid curing 100% silicone, which been specially formulated for glazing and aquarium construction.
Storm Sealant
Get a water-tight seal that lasts with Selleys Storm Sealant. This sealant delivers an immediate waterproof seal on any building material, wet or dry, indoors or outdoors.
- Overview
- Instructions
- Specifications
Selleys SolarFlex provides protection from ultraviolet (UV) radiation and other harsh weather elements. Harsh Australian and New Zealand conditions make the choice of an effective solar/weather protection solution critical.
Best For: Concrete, Timber, Metals, Cement sheeting, Brick, Plasterboard, Ceramic tiles, Fibreglass, Most plastics#
Where can this product be used?
- Sky lights
- Walls
- Patios
- Floors
- Fencing
- Windows
What materials is this product suitable for?
- Concrete
- Timber
- Metals
- Cement sheeting
- Brick
- Plasterboard
- Ceramic tiles
- Fibreglass
- Most plastics#
- #Not suitable on polyethylene, polypropylene or Teflon.
How to Use
- Ensure substrates are clean and free of oil, grease or loose particles.
- Cut seal and nozzle and fit to cartridge, then place in caulking gun.
- Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
- For neat joints, use masking tape on both sides of the joint and remove before skinning.
- Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.
Limitations:
- #Not suitable on polyethylene, polypropylene or Teflon.
- Cure excess product before disposal.
- Not for permanent water immersion or below water-line use. For water immersion please use Selleys Marine Flex
Handy Tips
- In dry conditions, surfaces can be misted with water to speed up cure.
Warranty Information
Warranty Information
*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.
Additional Information
**Meets GBCA limits for general purpose and architectural sealants.
Clean Up
- Uncured product can be removed with mineral turps.
- Cured product can be removed with Selleys Silicone Remover or by mechanical action.
Size |
300g Cartridge 445g Cartridge 600mL Sausage |
Colours |
300g – Clear 445g - Black, Grey and White 600mL – Grey and White |
Technology |
Sil-X® |
Use |
Interior |
|
Exterior |
Useful downloads
How to Guides
How To Remove Old Silicone
Remove old silicone with ease using Selleys. Our guide will show you how to remove old silicone and prepare surfaces for reapplication.
How To Use a Caulking Gun
Learn how to use a caulking gun for a professional finish with Selleys step-by-step guide. Get tips & tricks to make the most of your sealant.